HV Proximity & Crush detection
Wireless HV Proximity Sensors
Our Patent Pending GoUpSafely (GUS) Aerial High Voltage Protection System can be retrofitted to any machine that may have contact with aerial electrical conductors.
The small mounting footprint allows installation to almost anywhere along the boom. The system prevents the machine moving within its exclusion zone by interfacing computer controls and machine controls to monitor and override as required.
The Control Interface Module monitors both machine control motions and the AC sensors. When a powerline is detected, active machine motions become locked-out, preventing the machine from moving closer while allowing the operator to direct the machine away from the electricity source. The GoUpSafely Aerial High Voltage Protection System uses a capacitive sensing and active filtering technology to remove unwanted interference from radio frequency and other sources, minimising nuisance detections.
WR-3 Wind speed Sensor
WR-3 is a long-range portable wireless anemometer. It has a handheld portable display unit and sensor suitable for both permanent and temporary installation. The sensor transmits data every 2 seconds in 400m radius from the receiver. Each sensor has its own address so several anemometers can operate in close proximity without disturbance.
Perfect for your EWP, Boom Lift or Telehandler